1.Anhydrous paste will be posted on the site clean.dry. Stripped of all or part of the end of the paper,set a good position,is fixed on the upper end,from top to bottom paste on the body. use a plastic scraper or bank card and forth scraping,extrusion will be fully air. 2.water paste will be posted on the site clean stripped of all at the end or paper,aqueous cleaning agent sprayed on the car body the adhesive area and stickers on the gum surface set a good position, the sticker carefully attached to the vehicle body with a plastic scraper scraping,scraping out the water and the air. the natural air dry for 30 minutes,finally remove the transfer film. Tips: Never put the car under the hot sun within 48 hours after the installation! Never wash the car within 48 hours after installation!
